Akern Reads results after “check system” is output
Bluetooth Akerns send out all data at once (“Check System” then the results). R Akerns start with “Check System” and display results as they are read.
Check the relay and Bluetooth Akern connection:
- go to measurement and automation
- Devices and interfaces > NI USB-6001 “Dev 1”
- Click “Test Panel” at the top
- Go to Digital I/O tab
- Set select direction to “All Output” and select state to all low (A pulse signal will change the ON OFF state of the akern and Bluetooth akern is set to port 3 and 4)